Nitro rc car Support

Off-road vs on-road
The most popular type of R/C car is the Off-Road Buggy. Big tires with "knobby" spikes, full-travel suspension parts and a high ground clearance a...
Fri, 4 Jul, 2014 at 7:21 AM
Should I Get A Nitro Or Electric R/C Car?
This is one of the most important questions that most beginners over look. Nitro powered cars are a lot faster and required more driving skill to control....
Tue, 23 Sep, 2014 at 9:16 PM
Nitro car takes long to start and then cuts out straight away
This could be a few things so we will need to go through a few different checks. My first guess would be maybe your flywheel is loose. Attached...
Sun, 28 Dec, 2014 at 4:06 PM
Pull start will not pull or turn the engine over / pull starter is stuck
It could be a problem with the pull start or the engine. 1. Are you able to turn the flywheel at all, either way, or is the flywheel locked solid in both d...
Sat, 30 Aug, 2014 at 1:11 PM
How do u turn off the engine?
To turn the engine off cover the exhaust hole with a cloth for a couple of seconds.
Fri, 4 Jul, 2014 at 7:25 AM
Testing for correct engine operating temperature
Hi, br />  The best way to check that the temperature of your engine is correct (and therefore your mixture setting is correct) is to do the &...
Fri, 4 Jul, 2014 at 7:25 AM
Engine Mount Screws for 1/16th Nitro Buggy/Truggy
The screw's you are looking for are m2.5 x 8 Product ID: 30787 M2.5*8 Hex screw 10 pcs £2.98 Inc. VAT
Fri, 4 Jul, 2014 at 7:26 AM
Condor One Way Bearing
The Condor Model itself has a Team Infinity engine in it, the engine will either have a 12mm or 14mm bearing depending on age etc. The best way in to meas...
Tue, 3 Feb, 2015 at 1:20 PM
Cost of delivering Fuel
We can only send Nitro Fuel to mainland UK postcodes due to it being classified as a flammable item. We also have to send it using our courier which will co...
Fri, 4 Jul, 2014 at 5:20 PM
self build kits
we are hoping to get some self build Condor and Cyclone kit's in around the start of December to mid December. So keep a look out on our site for any up...
Sat, 23 Aug, 2014 at 2:06 PM