The spycopter should have two sets of wires that show under the 'belly' of the canopy.

The one that is usually zip tied to the model is for 'binding' the receiver to the transmitter. this,usually black plug, on the model will normally have three coloured wires in it, red/white and black and must only be used for the binding process.

The power supply for the model,for connecting the battery to, is usually a red coloured smaller plug and should only have two wires in it, red and black. this plug is for the battery only to power the receiver.

If you are not sure, or need any further help, please feel free to get in touch with us.