When tuning your engine, sometimes it can be difficult to remember what settings you are running. For example, during the colder winter months all engines will need to be tuned a little 'richer' than in the warmer summer months.
If you are not sure,sometimes it can be easier to put the carb settings back to the factory settings and re-tune the engine from there. These settings will be a little on the 'rich' side so the engine may sound a little over fuelled and you should see some oil/un-burnt fuel being dispersed from the exhaust pipe.
Start the engine and ensure it is fully warmed up prior to tuning.
With the carb in these settings we know that we should only have to lean the High Speed Needle for good engine performance.
These settings are for the monster truck and the baja buggy .
Low speed Needle - 1+1/4 turns out from fully closed.
High Speed Needle - 1+1/2 turns out from fully closed.
Factory Carb Settings For ShengQi Petrol Engines Print
Modified on: Sun, 28 Sep, 2014 at 6:39 PM
Did you find it helpful? Yes No
Send feedbackSorry we couldn't be helpful. Help us improve this article with your feedback.