FAQ

Default solution folder, feel free to edit or delete it.

Nitro RC / What steps should I take prior to running?
There are a few things everyone must do prior to starting the first time. 1. Air Filter Oil should be used on your air filter. This will prevent du...
Tue, 8 Jul, 2014 at 12:49 AM
Nitro RC / Why did my spur gear strip?
The motor pinion and spur gear mesh is probably too great. There should be about .003 - .005 gap between the teeth of the two gears. An easy way to set the ...
Fri, 27 Nov, 2015 at 10:05 AM
Nitro RC / How do I test my servo?
If your steering does not work, one possible cause could be a damaged steering servo or receiver. If your throttle servo is still responding corre...
Mon, 18 Aug, 2014 at 9:47 AM
Nitro RC / What other tools or accessories will I need?
You will need 12 xAA batteries. 8xAA for the radio control transmitter and 4xAA for the car servos. You will also need Nitro Fuel, we recommend 15% Nitro. L...
Wed, 17 Sep, 2014 at 6:02 PM
Nitro RC / Why doesn't my transmitter work?
1. This is a very common problem. If the batteries installed are not fresh or fully charged rechargeable batteries, the controller will not operate correctl...
Mon, 14 Sep, 2015 at 4:28 PM
Nitro RC / What is 'Nitro'?
Nitro is short for nitro methane, which is an ingredient in model fuel that provides some of its own oxygen, allowing more fuel to be burned than would be p...
Mon, 7 Jul, 2014 at 8:15 PM
Nitro RC / Pull start too hard
 If the pull starter is hard to pull this means that the engine is flooded (there is too much fuel in the combustion chamber). At this point don’t pull the ...
Fri, 24 Oct, 2014 at 10:53 PM
Binding Your 2.4ghz Transmitter/Receiver
Most model's come pre bound, if yours is not bound you can rebind it with the bind plug supplied with your model. Just turn on the receiver and put ...
Sun, 6 Dec, 2015 at 7:44 PM
RC TRANSMITTER REVERSED
If you control are reversed on your transmitter , forward is backwards and left is right etc You will find your handset has  the channel reverse switches...
Sun, 6 Dec, 2015 at 7:39 PM
27mhz Heng Long transmitter not working
If you have a Heng long black 27mhz transmitter will not light up ,the issue will be that the batteries are not making a good connection.  Some batteries...
Sun, 6 Dec, 2015 at 7:37 PM